How do I know if I need a water pressure regulator?

You will need a water pressure regulator if your water pressure reaches levels near 80psi. In fact, building code requires water pressure regulators if psi reaches 80.

Where is my home water pressure regulator?

A water pressure regulator is a dome-shaped brass fitting that generally is found just past the main shutoff valve, where the main water line enters the house. It usually has an adjustment screw on top.

Does a house need a pressure regulator?

If the water pressure level coming into your home from the city exceeds 80 psi, you need a water pressure regulator. Reducing the system pressure 10 to 20 psi can save thousands of gallons a year in the typical home.

How much should it cost to replace a water pressure regulator?

The part usually costs around $50, while hiring a professional plumber to install one ranges from $250-350. Here’s an overview of how it’s done: Find the proper location. Usually, water pressure regulators are installed where your main water line comes into your house, after the main shutoff valve.

How long does it take to install a water pressure regulator?

An experienced plumber will take around three hours to install a water pressure regulator.

Does every home have a water pressure regulator?

Do all homes have a water pressure regulator? No, not all homes have a water pressure regulator. Whether you need a regulator depends on the water pressure from the municipal supply. If the city’s water lines run at pressures above 80psi, then you’ll need one to protect your pipes.

How do you test a water pressure regulator?

To determine if you need a water pressure regulator test the water pressure of the main water supply to your house. You can buy a pressure gauge for local hardware or home improvement store. Screw the pressure gauge onto any hose bib or washing machine bib and turn the water on to measure the water pressure.

How much does it cost to install a pressure regulator valve?

For a basic project in zip code 47474 with 1 valve, the cost to Install a Pressure Regulator Valve starts at $294 – $353 per valve. Actual costs will depend on job size, conditions, size options.

What does a water pressure regulator do?

A water pressure regulator is a plumbing valve that reduces the water pressure coming from the main water line into the house. This valve brings down the pressure to a safe level before the water reaches any plumbing fixtures inside the home.

How does a pressure regulator work?

The main air supply is connected to the AIR INLET PORT.