Q&A

Can you use two different brands of RAM same speed?

Can you use two different brands of RAM same speed?

Can You Mix Different RAM Brands? In short, the answer to this question is: yes. No matter the brand, speed, and size of the RAM, you theoretically can get it to work on your system; though it may prove to be problematic. Also, depending on the setup & workload, you may not even notice a difference in performance.

Can you mix and match ddr3 RAM?

Can you mix different brands of ddr3 ram? – Quora. The short answer is, usually yes. Most consumer machines have what is known as “flex support.” This allows you to mix different brands, timings, clock speeds, and capacities of RAM. It does NOT usually allow for mixing of voltages, so pay special attention to that.

Can you mix different frequency RAM?

You can’t add RAM of different sizes (frequencies/models/etc.) If you install two RAM sticks of different frequencies, both of them will be working on the lowest frequency. So, if you Installed one stick with 1600Mhz and other with 2400Mhz, the latter will work on 1600Mhz, thus lowering its efficiency.

READ ALSO:   Who acquired Vedantu?

Can you use mismatched RAM?

TLDR: Can I Use Different Brand and Size Ram Sticks Together? Yes, you can use different brand RAM sticks together, even if they don’t have the same size. However, using mismatched RAM modules may negatively affect the performance and stability of your computer for the reasons we describe in detail in this article.

Can you use two different types of RAM?

You cannot mix different generations of DRAM. In fact, you can’t install a different generation of DRAM in your system at all. The reason is that your motherboard is built to process one generation of memory.

What happens if you use two different RAM frequencies?

The short answer: you almost certainly won’t hurt anything just by trying to install the two DIMMs together. The potential problem is not related to using different frequencies of RAM; any motherboard will fall back to the speed of the slower memory module (DIMM).

READ ALSO:   Do codependent people attract narcissists?

Can I use 1333MHz and 1600MHz RAM together?

Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.

Does the brand of RAM matter?

Yes, the brand does matter. Brands that are “legit” can afford to test the DIMMs properly. I usually recommend one of these: Kingston HyperX, Corsair, or Crucial. Most people having problems with RAM, own G.

Can I use RAM of different brands?

There’s a prevailing misconception you cannot use different RAM sizes together or that you cannot mix RAM brands. Simply put, that’s not true. The answer is Yes, you can mix RAM sticks and RAM sizes and even different RAM speeds—but mixing and matching RAM modules isn’t the best for system performance.

Can I use different brands of RAM with different speeds?

Some motherboards and specific OEMs might not function with RAM modules of different speeds and timing but they are pretty rare. Also you can mix brands with modules having the same timing and speed without much compatibility issues. Also ideally you should have similar modules on the same channel if you are using more than 2 sticks of RAM.

READ ALSO:   How can I see myself in 10 years?

Can you mix DDR2 and DDR3?

Mixing RAM Size Most people will agree that you don’t want to mix RAM modules in your computer. This means that if you have DDR2, you shouldn’t use it with DDR3. If you have DDR3, you shouldn’t use it with DDR, and so in the different types of RAM.

Can you mix different types of RAM?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. They can be different speeds, and made by different manufacturers. It used to be only the Form Factor that was important, but with low voltage Ram now on the market, that has to be taken into account as well.

Can I put DDR3 RAM in a DDR4 slot?

As others have mentioned You can’t put DDR3 in DDR4 (different slots). As others mentioned you can if you want mix and match for an Ideal mix and match: Same Speed, Size and Latencies (basically same RAM different brand). You can Mix different sizes not recommended.