Articles

How many iron sheets do I need for one room in Uganda?

How many iron sheets do I need for one room in Uganda?

You need around eight 3 meter iron sheet pieces for a minimal single self-contained house to be complete. One room can take 3,000 bricks and if each one costs sh300 then it will cost you sh900,000.

How long is an iron sheet?

Corrugated galvanised iron (CGI) sheets

Item Required value
Length (imperial system) 6ft (1.83 m), 8ft (2.44 m), 10ft (3.05 m)
Length (metric system) 2.00 m, 2.50 m, 3.00 m
Width after corrugation 914 mm (36 in)
Number of corrugations 12 corrugations

How wide is an iron sheet?

The two most common widths are 26 and 36 inches. Other standard widths include 24 and 39 inches. When calculating coverage using the width and length of corrugated roofing, keep in mind that each piece will need to overlap by several inches.

READ ALSO:   What is an example of a courageous person?

How wide is a mabati?

It offers consumers the benefit of having a box profile Mabati that is wider than what is currently in the market. Available in both gloss and textured finish. Has an effective cover width of 1015 mm. Comes in Gauge 28-30 and requisite accessories available.

How many corrugated sheets do I need?

The required number of Corrugated sheets can be calculated as follows: Number of sheets for 8.5 Corrugated = Length of the building ÷ 0.610 mm. Number of sheets for 10.5 Corrugated= Length of the building ÷ 0.762 mm.

How much does it cost to build 2 bedroom house in Uganda?

Construction of a two-bedroom house will cost on average between Shs70 million and Shs90 million, assuming you do not purchase luxury materials and fittings. This does not include general exterior works (compound paving, septic tanks, drains, boundary walls and landscaping) or VAT.

How much does it cost to build a single room?

READ ALSO:   How do you know if the person you are talking to is really listening?

Total cost =114200+68520 = rs 182700. Total construction cost for fully furnished one room 10’×10′ is around rs 182700, this total cost includes cost of building construction, plastering, PCC flooring, tile flooring, electrical fitting, plumbing, painting putty and water and sanitization.

How much does mabati cost?

Mabati of 2M and gauge 30 shall cost approximately 760 in a local hardware outlet. About 448 shillings per meter square. For plain gauge 30 mabati, expect them to cost around 470 shillings.

How long is a mabati?

Standard Length : 2.1m, 2.4m, 2.7m and 3m.

How do I calculate corrugated iron roofing?

The required number of Corrugated sheets can be calculated as follows:

  1. Number of sheets for 8.5 Corrugated = Length of the building ÷ 0.610 mm.
  2. Number of sheets for 10.5 Corrugated= Length of the building ÷ 0.762 mm.

What is the length of an iron sheet in Kenya?

Iron sheets in Kenya are sold in modules of 2m, 2.5m and 3m lengths with widths of 0.85m.

READ ALSO:   Can stopping ADHD meds cause weight gain?

What size iron sheet do I need for my roof?

Available iron sheets come in gauge 30 and 32. In the earlier years, gauge 26 iron sheets were available but currently, these have to be ordered directly from the major iron sheet manufacturer factories. Actual fitting will also have an overlap of approximately 150 to 200mm.This reduces the actual coverage on the roof.

How much does it cost to build a 50 x 100 plot?

Assuming the cost per m2 for iron sheet housing is kes 6,000 per m2, a 50 x 100 ft plot construction will cost as below. Design type. 2 rooms with outside sharing toilet and bathrooms. Each room is 12m2. Total area for 2 rooms =24m2.

How much does a 2m box cost in Nairobi?

2M length of gauge 32 costs kes 410 in an average hardware shop around Nairobi. This translates to kes 242 per m2. Gauge 30 box profile prepainted. 2M length of gauge 30 costs kes 760 in an average hardware shop around Nairobi. This translates to kes 448 per m2.