Why is cover provided for the reinforcement?

Why we provide Concrete Cover? Covering is provided to arrest the attack of corrosion. Reinforcement is prone to corrosion and fire for atmospheric conditions. If the proper cover isn’t implemented then there is more chance of corrosion and cracks in hardened RCC.

Why is the concrete cover to reinforcement required?

Concrete cover for reinforcement is required to protect the rebar against corrosion and to provide resistance against fire. The thickness of cover depends on environmental conditions and type of structural member.

Why is cover provided?

It provide fire resistance and insulation to steel which is embedded in concrete. Reinforcement is sufficiently embedding to enable to be stressed without slipping. It protect the reinforcement from chemical attack and moisture, that’s leads to deterioration of reinforcement.

Why effective cover is provided?

Purpose of Providing Cover: 1. To protect the reinforcement from corrosion. 2. To provide fire resistance to the reinforcement.

Why is clear cover provided in structural components?

Covers are given to provide protection against corrosion and fire to the rebars. If less cover is provided, protection against the above will be inadequate. And if more than required is provided then the concrete on the tension side of any structural member, will crack under tension.

What is clear cover to reinforcement?

The clear cover is the distance between the exposed concrete surface (without plaster and other finishes) to the nearest surface of the reinforcing bar Look into the following image for more detail.

Why do I need to use concrete cover for reinforcement?

Concrete cover for reinforcement is required to protect the rebar against corrosion and to provide resistance against fire.

What are the specifications for reinforcement cover for different structural members?

Below are the specifications for reinforcement cover for different structural members in different conditions. a) At each end of reinforcing bar, concrete cover not less that 25 mm or less than twice the diameter of the bar should be provided.

Why must you observe concrete covers when constructing pile foundations?

You must observe concrete covers when constructing the pile foundations and/ or footings to the ground beams and slab-on-grade, because these types of concrete elements are exposed to weathering, and are the most likely to experience uplift pressure from the water below ground.

What is the purpose of the reinforcing bars cover?

The cover is provided to protect the reinforcing bars from corrosion and fire, and also to give the reinforcing bars sufficient embedment to enable them to be stressed without “slipping”(losing bond with concrete).

https://www.youtube.com/watch?v=euPXLY-RaYM