Why does my TV remote only work sometimes?

There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV.

How long should batteries last in TV remote?

3-6 months
Under normal or moderate use, the batteries in a remote control should last up to 3-6 months. IMPORTANT: If you do not use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

Can TV remotes wear out?

No matter how good your remote is, it will get dirty and wear out from frequent use. Even if some of the keys have stopped working or have to be pushed really hard, they can be fixed. The most common problem has to do with the keypad’s conductivity with the circuit board.

How do I fix an unresponsive remote?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

Which battery is used for TV remote?

1900 mAh (AA) or 750 mAh (AAA) is ideal. Use these batteries only in appliances like torches, tooth brushes, computer mouses and remote controls.

What kind of batteries does a TV remote use?

Most remote controllers use batteries in the AAA and AA sizes. Manufacturers often ship these products with off-brand, low-power zinc carbon batteries that are quickly exhausted.

How do I fix my TV remote not working?

Section B: Checking items of the remote control (common)

1. Make sure none of the remote buttons are jammed.
2. Reset the remote.
3. Clean the remote control terminals.
4. Replace with fresh batteries.
5. Perform a power reset on the TV.
6. For Android TV/Google TV: symptoms may improve by updating the software of the remote control.

Why is my TV not responding to my remote?

Unplug all cables and accessories from the TV such as: Switch the TV back ON with the remote control. If the TV does not respond, press the button/joystick on the TV to switch the TV ON. If the TV starts up and the remote control is functional again, the external devices can be connected to the TV again, one by one.

How do I fix my TV remote sensor not working?

Switch off the TV, switch off the power outlet and unplug the TV from the outlet. Press and hold the power button on the TV for 30 seconds and then release. Reconnect the power cable to the TV, switch on the power outlet and then switch on the TV. Test if the remote control now works correctly.

Why is the remote not working on my TV?

The remote may not work temporarily due to poor contact of the battery or static electricity. Remove the batteries from the remote. NOTE: Depending on the type of remote control, opening the battery compartment cover may vary. For details, refer to the manual of your TV.

What should I do if my TV buttons are not working?

If TV buttons can be operated, proceed to Section B: Checking items of the remote control. If TV buttons cannot be operated, proceed to Step2. NOTE: Depending on the model, the positions of TV buttons vary. Check the sides, back, front, and top of your TV. Check that the lamp (power lamp/standby lamp) on the front/bottom of the TV is on.

Why does my Samsung TV turn on but not turn on?

1) Make sure that the second remote is in the TV mode. 2) Press [Power] on the remote and see if it turns the TV on. If the TV turns on, the problem is in your Samsung remote. If the TV does not turn on, the problem is in the remote sensor.

What should I do if my Remote controls are not working?

Replace the batteries in the remote control with new ones and test functionality. If the abnormal behavior begins again there is a problem with your remote and it will need to be replaced.