What size were Viking shields?

The Vikings used round shields made of wood. be as large as 95cm or as small as 70cm. Shields were often custom made to be the perfect size for the warrior who was going to be using it.

How much did a round shield weigh?

The shield’s weight will vary by size, thickness, features, and materials used. Rectangular shields tend to weigh between 6 – 14 lbs (2.7 – 6.5 kg), while most circular shields weigh around 4 – 5 lbs (1.8 – 2.3 kg).

What did Viking shields actually look like?

The type of shield used by the Vikings can be traced back to the Iron Age. It consists of thin planking, which forms a circular shape. In the middle is a dome of iron to protect the shield bearer’s hand.

How big should a round shield be?

Round shields seem to have varied in size from around 45 – 120cm (18″ – 48″) in diameter but the smaller and more manageable 75 – 90cm (30″ – 36″) is by far the most common.

How thick is a Viking shield?

The shield was made of six wooden planks, butted and glued together. The overall diameter of the shield was 84cm (33in), and the thickness was uniformly 13mm (1/2in).

How heavy is a kite shield?

Average of Historical Shields is 2.75 lb/sq ft, which corresponds to a 24″ round weighing 8lb 10 oz.

How much did a Viking sword weigh?

Late in the Viking era, blades became as long as 100cm (40in). The blade was typically 4-6cm wide (1.5-2.3in). The hilt and pommel provided the needed weight to balance the blade, with the total weight of the sword ranging from 2-4 lbs (1-2 kg). Typical swords weigh in at the lower end of this range.

What was the size of a Viking shield?

The shields were normally around 80 to 90 cm or around 35 inches in diameter, making it a rather large object to carry around for warfare. The size might be an indicator to the importance of the shield, when it came to the defense of the Viking warrior, as such a large shield would always be difficult to carry around.

What kind of weapons did Viking warriors use?

Viking Warrior Shields. A shield was an essential piece of equipment for every Viking warrior, used for both offensive and defensive purposes the shield could mean the difference between life and death for a Viking.

What was the shape of the shield of a shield?

It was hemispherical and protected the hand. Usually, the shield boss had a thin flange and was about 6″ diameter. The points of nails, by which the boss was attached to the shield, were bent over or flattened on the inside. The handle or grip crossed the central hole and went across the whole of the shield,…

How would you describe the shape of a Norse god shield?

The shape of the boss itself could range from an almost perfect dome shape to a more flat surface head. Of course to hold the shield effectively a hand grip is required and on the old Norse shields this would run almost one hundred percent of the shield diameter.