What is the point of a cantilever mount?

Firstly, the fact that the cantilever mount pushes the optics a bit forward not only offers a better eye relief and field of view, but also clears a bit of space on the rail in the back of the rifle, making it possible to mount something else in that spot, for example magnifiers or folding back-up sights, and so on.

What are offset scope rings?

The distinctive offset reversible design allows for added flexibility for scope placement and optimum eye relief. The rings extend forward 1.5 inch from the base and can be mounted in either direction, allowing for a variety of mounting options dependent on your preferred scope placement and your mounting system.

What is the difference between cantilever and overhang?

Overhanging: A simple beam extending beyond its support on one end. Cantilever: A projecting beam fixed only at one end, while the other end has no support.

Can I use any scope rings?

You can use it on nearly any caliber of gun no matter how you mount your scope and with whatever scope mounting hardware you want. Gun stabilizer-Notice I didn’t say gun vice. A gun vice of some type is ideal, but what you really need is a way to stabilize your gun and this can be accomplished in a number of ways.

Are all scope rings the same?

Most scope rings have heights labeled from low to extra-high, with medium being, as you might expect, the most common choice. Scope ring width refers to the diameter of the scope’s tube. Most scopes have one-inch tubes and, so, this is the most common ring size.

Should I Loctite my scope mounts?

The quick answer is no we don’t, not unless something indicates to us that it is needed. Most of the companies that make rings and mounts recommend not using Loctite for a couple of reasons. Instead of using Loctite we prefer to use a torque wrench that measures in pounds per inch.

Where is the best place to mount a scope?

It’s usually best to mount the scope as low on the rifle as possible without the objective bell touching the barrel, and allowing clearance at the eyepiece for free operation of the bolt. Ask a savvy gun shop operator for advice.

Can you mount a scope too high?

Senior Member. Your scope is way too high. It’s the goal to get the scope as close to the bore as possible. I’m sure you will be able to find lower rings and get proper cheek weld.

Should I mount my own scope?

Some shooters like to let a professional gunsmith mount a new scope, but you can mount it yourself without any fear of ruing the precision of your rifle. Mounting your scope yourself also means you can fit it to your exact measurements, matching it up to your shoulder for that bespoke fitment.

How do I choose the best scope mounting system?

To choose a good mounting system, you need to understand how each part works. Both rail and base act as a platform between your firearm and your scope mounting equipment. You attach your rail or base onto the upper receiver of your firearm. Then you attach scope rings and/or mount onto your rail or base.

How do you mount a scope on a rail and base?

You attach your rail or base onto the upper receiver of your firearm. Then you attach scope rings and/or mount onto your rail or base. Rail – Rails refers to a 1 piece equipment with many slots/positions for you to attach rings/mount. They are the newer standard for scope mounting.

Can I mount 2 scope rings on a single platform mount?

However, 2 scope rings on a single platform mount is heavier and more expensive compared to 2 piece scope rings. And with every 1 piece equipment, it could obstruct your bolt action.

How high should a scope ring be on a rifle?

Measure how high your scope should be from the top of your rifle to center of your eye level, then jot down that number and refer to it when looking for rings and mounts. When out shopping, most scope rings have low, medium and high height for you to choose from.

https://www.youtube.com/watch?v=wEX_a7ofi6E