What is the difference between setback and building line?

“Building line: Means the line up to which the plinth of a building may lawfully extend within the plot on a street or an extension of a street. No overhead projections are allowed beyond the building line. Building setback: Minimum distance between any building or any structure from the boundary line of the plot.”

What is meant by setback line?

It is the distance measured in feet between a house or structure from the front, side, and rear. Maintaining the setback line allows easy access to underground utilities. Also, it is crucial for ventilation in the building and parking.

What is setback line in construction?

In land use, a setback is the minimum distance which a building or other structure must be set back from a street or road, a river or other stream, a shore or flood plain, or any other place which is deemed to need protection. In some cases, building ahead of a setback line may be permitted through special approval.

How is property setback measured?

General. “Setback” is the minimum distance any building or structure must be separated from a lot line. Front, rear, and side yard setbacks are measured from the existing right-of-way, access easement, or property line, and then in a straight line to the closest point of the building or structure.

Why do property setbacks exist?

Why are they used? In planning and zoning, setbacks are used to provide a spacing distance between different land uses. If a person wants to put a building along a county road, your setback is 50 feet from the edge of the right-of-way.

What is the purpose of a side yard setback?

Sideyard setbacks keep houses from getting too close to each other, and are the restrictions that cause homeowners the most headaches.

How close to Neighbour can I build?

As a rule of thumb, a build that reaches 7.2 feet is considered acceptable and anything over that we do recommend speaking to your neighbour.

Can I build up to the boundary of my property?

You must give adjoining owners one month’s notice of an intention to build a new wall or party fence wall on the line of junction (that is, the boundary). If you wish to build a wall astride the boundary, you are required to obtain the adjoining owner’s consent.

What is the building line of a property?

Building lines are a specified distance from the sides of a lot that denote where a building or structure cannot be placed. Building lines are often called setbacks, because a building must be “set back” a specified distance from the property line.

Why do we need setbacks?

The purpose of setbacks is to ensure security, privacy, a uniform neighbourhood (i.e. with buildings set at the same distance), and environmental protection. They also allow public utilities to access buildings.

What is the minimum setback for a residential area?

The term “setback” usually refers to the distance a house or structure must be from a property line. For example, a local jurisdiction may require a house to be no closer than 20 feet from the front property line, five feet from the property lines on each side of the house, and ten feet from the rear property line.

How close can I build to my property line?

Some districts have different setbacks based on the use of the building. The primary structure might have to be 10 feet off the side line and secondary or outbuildings can be within 5 feet. Some areas have restrictions on how close your drive can be to the property line where other’s don’t care.

What are residential setback requirements?

What are the setback requirements for residential properties? All structures in the Residential Agricultural (AR-1) zoning district are required to be setback from the property lines by the following distances: Front Property Line Setback = 40 feet *Side & Rear Property Line Setback = 15 feet

What is a prevailing setback?

“Prevailing Setback” is a phrase used to define the front yard regulations for RA, RE, RS, R1, and R2 zoned lots. The Zoning Code reads in part “… that where all of the developed lots which have front