What is an intermodal tank?
Table of Contents
- 1 What is an intermodal tank?
- 2 What is the typical maximum pressure reading for a standard oxygen cylinder used in the medical field?
- 3 How many gallons does an ISO tank hold?
- 4 How many liters is an ISO tank?
- 5 Are intermodal tanks shipping or storage vehicles?
- 6 What is the most common intermodal tank used in transportation?
- 7 What is the legal weight limit for intermodal trucks?
- 8 What are the dimensions of an optimodal tank?
What is an intermodal tank?
Tank containers, also referred to as ISO tanks, intermodal tanks, or IMO portable tanks, are designed for intermodal transportation by road, rail, and ship. A tank container operator manages a fleet of tanks to transport liquid cargo for a variety of customers between essentially any two points in the world.
What is the typical maximum pressure reading for a standard oxygen cylinder used in the medical field?
For many reasons, patients that require additional oxygen use storage tanks with compressed oxygen to supplement their normal air intake. The size and subsequent capacity of the tank may vary but the full pressure is typically about 2,000 psi and can go as high as 3,000 psi.
Which type of transport containers are known as Spec 51?
Pressure tank containers, commonly known as “DOT Spec. 51 Portable” (International – IMO Type 5) containers, are less common in transport. They are pressure tank containers designed to handle internal pressures ranging from 100 to 500 psig.
Which type of container carries cryogenic materials?
MC 338 tanks are used for the transportation of cryogenic gases, sometimes referred to as refrigerated liquids. These materials are very cold with boiling points of -130F for carbon dioxide to -452F for liquid helium. Common cryogenics include oxygen, nitrogen, helium, argon, and others.
How many gallons does an ISO tank hold?
Nominal Capacities: 15,000 liters (3,963 gal), 17,500 liters (4,623 gal), 21,000 liters (5,548 gal), 23,000 liters (6,076 gal), 24,000 liters (6,340 gal), 25,000 liters (6,605 gal).
How many liters is an ISO tank?
Capacity (nominal) | 21,000 litre | 25,000 litre |
---|---|---|
Design Type | UN PT / Hybrid | UN PT / Hybrid |
Discharge Outlet | Bottom | Bottom |
Max. Gross Weight | 36,000 kg | 36,000 kg |
Tare Weight | 3,650 kg | 3,730 kg |
Are intermodal tanks pressurized or non pressurized?
Intermodal tanks—Used as both shipping and storage vehicles. They hold between 18,925 and 22,710 L (5000 and 6000 gal.) of product and can be either pressurized or nonpressurized.
What is the storage capacity of oxygen cylinder?
An aggregate total of compressed medical gases (e.g., oxygen, nitrogen, nitrous oxide) up to 300 cubic feet may be stored per smoke compartment in any room or alcove without special requirements for that room. Compressed gas cylinders must be secured in racks or by chains.
Are intermodal tanks shipping or storage vehicles?
What is the most common intermodal tank used in transportation?
Within the United States, IM 101 and IM 102 portable tanks are the most commonly used containers for both hazardous and non-hazardous materials. They are equivalent to IMO 1 and 2 tanks. Specification 51 tanks also in the United States are equivalent to IMO 5 tanks and are pressurized between 100 and 500 psi.
How many gallons does a 20 ISO tank hold?
5,547 gallons
External Width | 2,440 mm | 8 ft |
---|---|---|
Cubic Capacity | 21,000 liters | 5,547 gallons |
Tare Weight | 3,070 kg | 6,768 lbs |
Max. Payload | 27,410 kg | 60,425 lbs |
Max. Gross Weight | 30,480 kg | 67,200 lbs |
What is T75 tank?
The T75 20′ Liquid Gas Tank is a vacuum insulated liquid gas transportable / storage tank, designed to transport liquid Nitrogen by road, rail and sea with pressures ranging from 4.5 to 24bar. The tank dimensions meet the requirements of DNV, IMO and CSC.
What is the legal weight limit for intermodal trucks?
Legal Weight Capacity for Intermodal The Federal Gross Vehicle Weight Limit of 80,000 pounds for tractor/chassis/container is the same for both intermodal and truckload. The difference between intermodal and truckload lies in the 53′ COFC domestic intermodal container weighs roughly 2,500 pounds heavier than a standard dry van.
What are the dimensions of an optimodal tank?
Home > Intermodal > Optimodal > ISO Tank General Specifications. Frame Dimension: 20’lx8’wx8’6”h. Nominal Capacities: 15,000 liters (3,963 gal), 17,500 liters (4,623 gal), 21,000 liters (5,548 gal), 23,000 liters (6,076 gal), 24,000 liters (6,340 gal), 25,000 liters (6,605 gal).
How many intermodal containers are there in the world?
In 2012, there were about 20.5 million intermodal containers in the world of varying types to suit different cargoes.
What are the specifications of an ISOTANK?
Isotank Specifications. IMO 1. Possible Substances: Dangerous chemical liquids: toxic and/or corrosive and/or flammable. Tare: 3 to 4,5 Tons. Capacity: 14.500 L to 26.000 L. Steel Thickness: Stainless 4,90 mm to 8 mm. Discharge Location: Top, bottom, or both. IMO 2.