How wide is average fireplace?

Standard Fireplace Surround Dimensions Most fireplaces are 42 inches wide, while some smaller fireplaces can have as little as a width of 36 inches. Some somewhat bigger fireplaces can even be 48 inches wide. With the height, generally, a mantle should at least be 12 inches above the opening.

What are the sizes of fireplaces?

An average fireplace is about 36”x30”. When it comes to the actual dimensions of a fireplace, these can be found in just about any size larger than 24”x24”, all the way up to 48”x32” and higher. The physical size of a fireplace insert is often listed by the width in inches, and they tend to range from about 20” to 60”.

How wide should fireplace be on wall?

A 36″ or 42″ fireplace opening width is more common, but you need to assume about 18″ on each side for a typical non-combustible surround and wood mantel, 24″ on each side for something more grand. The same thing goes for stone on each side. You need enough room to make it look like an actual masonry fireplace.

Are fireplaces a standard size?

Once you’ve measured the height and width of the opening, the depth, and the height and width at the rear of the firebox, you will have accurately measured the dimensions of your fireplace.

What is the standard width of a gas fireplace?

Typical Gas Insert Sizing Most fireplaces, whether gas or wood burning, typically have openings that are nominally 36 inches or 42 inches wide.

How wide should a fireplace mantel be?

Your mantel should be wider than your fireplace. Typically, a mantel should be a minimum of 3 inches past the firebox on each side. However, more can be better. The average mantel is approximately 6 inches wider than the fireplace on either side, and some can be even wider.

How much space do you need around a fireplace?

The National Fire Code requires all combustible material to be at least 6 inches from the opening of the firebox. For every 1/8 inch of protruding combustible material, you must account for an additional inch of clearance.

What is the average width of a fireplace mantel?

The recommended width for a mantel is 6 inches (15.24cm) wider on both sides. So, if your fireplace is 36 inches (91.44cm), your mantle should be at least 48 inches (121.92cm) wide. Whether you want to install pilasters or not, you’ll need to have the same width for your fireplace mantle.

How thin can a gas fireplace be?

Heat & Glo®, the leader in fireplace design and innovative technology, is proud to offer REVO™ Series direct vent gas fireplaces. They are among the thinnest fireplaces ever made with 7-inch deep profiles, making it possible to install or hang them just about anywhere.

Should the fireplace be wider than the TV?

For the false wall options, generally there is a rule of thumb – always make sure the fireplace is wider than the TV. This allows the wall to frame the TV, while offering sleek lines for the edges of the fireplace. Having more space beyond the TV edges can sometimes make the TV look too small for the wall it is on.

How much space should be between fireplace and mantel?

about 12 inches
Most codes specify mantel distance from the firebox itself. As a general rule, a mantel is placed about 12 inches above the fireplace opening. Add an inch to the distance for every inch that the mantel protrudes. So, a mantel 6 inches deep would be attached 18 inches above the firebox opening.

What is the average depth of a fireplace hearth?

The U.S. hearth depth dimensions are 16″ or 20″ as we explain in more detail here. Please note that the hearth extension to front of a fireplace, given as 16″ or 20″ is a minimum dimension not a maximum. More is safer.