Do you need a gateway for each subnet?

Each one of the 256 networks could be called a subnet, but it does behave the same as a network in terms of handling packets and routing. So the answer is yes, you need a gateway for every subnet because a subnet is a network.

Can your gateway be in a different subnet?

No, you cannot. The gateway IP tells the system how to get to another subnet, and without it, packets won’t leave the current subnet. A computer only knows how to talk to the other computers that are directly connected on the same subnet.

Is default gateway on the same subnet?

The default gateway must be in the same subnet as the ip address range.

Should devices have the same gateway?

1 Answer. Though there are some exceptions to this in unusual setups, the general answer is no. You cannot configure your computer to use a gateway that is on a different subnet. You cannot reach devices on other subnets without going through a router (gateway).

Should IP address and gateway be the same?

1 Answer. No, it cannot be the same. Yes, you can change netmask, but you need to do that on every computer/device having an IP address on the network, otherwise part of the machines in the network cannot be reached.

What is difference between subnet mask and default gateway?

The subnet mask splits the IP address into the host and network addresses, thereby defining which part of the IP address belongs to the device and which part belongs to the network. The device called a gateway or default gateway connects local devices to other networks.

Is gateway same as subnet mask?

A gateway IP refers to a device on a network which sends local network traffic to other networks. The subnet mask number helps to define the relationship between the host (computers, routers, switches, etc.) and the rest of the network.

Do I need a gateway for a local network?

You can’t get to the internet without one A default gateway makes it possible for devices in one network to communicate with devices in another network. If a computer, for example, requests a web page, the request goes through the default gateway before exiting the local network (LAN) to reach the internet.

What is a subnet and gateway?

Does router need default gateway?

Default Gateway is used when the host doesn’t have any route information for a particular packet. So it will ask the default gateway. Now for a router there will be lot of static routing information, but if the router is not able to find a routing information, it should take the route mentioned in 0.0.

Is broadcast and gateway the same?

A broadcast address is the one that is used by one host to communicated to another host on the same network whereas the default gateway is this address that is used by all hosts to communicate with hosts outside the network/subnet. Traffic destined to other computers on another network is routed through the gateway.

Do I need a gateway address for each subnet?

A gateway address needs to be provided for each subnet. It is the address all IP addresses within the subnet go to, to find routes to network addresses outside the subnet. Having said that, a single router can support multiple subnets, responding, in each case, to a designated gateway address on the subnet.

What is gateway subnet in VMware?

The gateway subnet is part of the virtual network IP address range that you specify when configuring your virtual network. It contains the IP addresses that the virtual network gateway resources and services use. When you create the gateway subnet, you specify the number of IP addresses that the subnet contains. Popular Trending About Us

What is a gateway IP address?

A gateway IP refers to a device on a network which sends local network traffic to other networks. The subnet mask number helps to define the relationship between the host (computers, routers, switches, etc.) and the rest of the network. Additionally, what is the default gateway IP address?

What is the default gateway on a network?

The default gateway has to be on the same subnet as the IP address of the device. It’s typically the router’s IP address of the network that you’re connecting to. From the wikipedia page on Default Route: In computer networking, a gateway is a node (a router) on a TCP/IP network that serves as an access point to another network.