Can you extend a washer drain hose?
Table of Contents
Can you extend a washer drain hose?
If a remodeling project forces you to move the washing machine too far from the drain and the water supply for the hoses to reach, you don’t have to relocate the plumbing. Lengthening the drain hose isn’t difficult, because you can buy a drain hose extension that simply clamps onto the end of your existing hose.
Can you connect washing machine hoses?
Use a sink aerator thread to hose connection adapter to attach the water supply hose to the sink faucet. The adapter connects to the faucet and the hose connects to the adapter. Connect the other end of the water supply hose to the cold-water connection on the back of the washing machine.
Why does my washer have two drain hoses?
What is the purpose of two drain connections? LAW is a water saver, can drain the soapy water into a tub and th esecond hose drains the rince water down the drain…the soapy water can be drain back into the machine to be used a second time.
How far away can a washing machine be from the drain?
In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
How do you hook up a washer and washing machine to the same drain?
Connect the Sink and Washing Machine
- Insert the drain hose from the washing machine into the top of the sewer pipe.
- Fit together the p-trap and drainpipe and place them into position between the tailpiece and the sewer pipe.
- Connect the drainpipe for the sink to the tee inlet.
How high should the drain pipe be for my washer?
Washing Machine Drain Hose Backflow Prevention Proper Standpipe Height. Most washing machines require a standpipe with a height of at least 36 inches. Drain Hose. The washing machine drain hose must be maintained if backflow and other drainage issues are to be avoided. Clogs and Stops. Drain Vent.
What is the maximum length for a washing machine drain hose?
(163.71 kB) A.Mike Casey, a licensed plumbing contractor and co-author of Code Check Plumbing, responds: Most dishwashers come from the factory with a 6-foot 6-inch drain hose, and nearly all manufacturers allow this hose to be extended to a maximum total length of between 10 and 12 feet.
Where is the drain hose on a washing machine?
Locate the machine’s drain hose. While the actual drain is located inside of the washing machine, the hose is an outer feature. It’s a large hose connected to a standpipe on your home’s wall to the back of the machine.
How do you connect hose to hose reel?
Connect your hose to the hose reel by screwing it onto the hose reel’s water output. Wind the hose reel with the crank, guiding the hose back and forth across the reel to keep the reel uniform.