How do you build a cool house in hot climates?

Andrew’s top 7 tips to fine-tune the cool factor

1. Take advantage of thermal mass. “Building with heavy, thick materials – like a concrete slab – will keep a building very cool.”
2. Insulate, insulate, insulate.
3. Install roof vents.
4. Choose a lighter roof.
5. Plan an outdoor room.
6. Consider pavers over a deck.
7. Turn to greenery.

How do you cool a building naturally?

Here are eight easy and environmentally conscious ways to keep your home cool without dialing down the thermostat.

1. Keep an Open Mind to Open Windows.
2. Become a Fan of Fans.
3. Bring the Swamp Indoors.
4. Lock Out the Heat.
5. Stay Out of the Kitchen.
6. Stay in the Shade.
7. Use Cooling Curtains.
8. Treat Your Roof to Some Cooler Coloration.

How can I build a house without air conditioning?

Best Ways to Cool a House: Downstairs

1. Draw the Blinds. While natural light is great, too much of it can turn your home into a sauna during the summer months.
2. Avoid Using the Stove.
3. Unplug Appliances You’re Not Using.
4. Turn on Bathroom Fans.
5. Opt for Breezy Clothing.
6. Add Outdoor Shade.
7. Switch to No-Heat Lightbulbs.

What kind of materials can be used to build houses in a warm weather to keep it cool?

Thermal Mass and Insulation Dense materials such as stone, concrete, and earth each have a number of properties that allow them to act as good insulation from heat.

How do I overcome extreme heat in my house?

15 Ways to Reduce Heat Inside Your Home Without Using Electricity

1. Tune/Update Your Windows.
2. Plant a Tree.
3. Paint Your Roof.
4. Install External Blinds or Operable Shutters.
5. Close Your Drapes.
6. Cook Hot Food Outside.
7. Utilize High-Reflectivity Window Film.
8. Unplug Electronics.

What is the alternative to air conditioning?

Fans. Whether you go for a table model, a pedestal-mounted fan or a fan that is suspended from the ceiling, the (good old) fan is an efficient cooler and a simple alternative to an air conditioning unit.

Do concrete houses get hot?

It is made out of concrete blocks and cement floors. So it has poor insulation and it has a low, exposed roof. So the structure gets very very warm in the summer even when its reasonably cool outside. The temperature difference between the inside and outside can easily be 10 degrees or more.

How can I get cold air in my room?

7 Tips for Cooling a Room Without AC

1. Keep the Windows Closed and Covered.
2. Shut and Insulate Your Doors.
3. Don’t Use the Oven.
4. Swap Your Light Bulbs.
5. Use Fans the Right Way.
6. Manage the Humidity.
7. Let the Night Air In.

How hot is too hot in house?

Be careful not to decrease your home’s temperature to less than 55 degrees in winter or allow your home to warm to more than 80 degrees in summer, as it may leave your home susceptible to damage. An indoor temperature of less than 55 degrees may lead to freezing pipes, while anything more than 80 may damage drywall.

How can I cool my House in the summer?

Opening windows is a common way people try to cool buildings – but air inside will be just as hot as outside. In fact, the simplest way to keep the heat out is with good insulation and well-positioned windows. Since the sun is high in summer, external horizontal shading such as overhangs and louvres are really effective.

How can I cool down my home without electricity?

Cool your home naturally. There are numerous ways to reduce home cooling costs, such as ceiling fans, natural ventilation, minimizing heat gain, weather sealing, insulating, window shading and glazing, roof lightening and landscaping.

How can I reduce the temperature in my house?

Make sure there’s proper cross-ventilation in your house. By proper cross-ventilation, when you open the windows in the morning, fresh breeze enters and hot and light air leaves the building at a pretty good rate, thus reducing the temperature of the building.

How do you cool down a house with a windward side?

If your home isn’t oriented to face the prevailing breeze, you can use landscaping or wing walls on the windward side of your house to encourage the wind to approach your inlets head-on. Openings in opposite walls allow maximum air movement. Openings in adjacent walls create air turbulence, increasing the cooling effect.