How do I fix no bootable device insert boot disk and press any key in my HP laptop?

Fix: No Bootable Device — Insert Boot Disk and Press Any Key

1. Preparation.
2. Solution 1: Change the Boot Mode to UEFI.
3. Solution 2: Take Out the CMOS Battery to Reset Certain Settings.
4. Solution 3: Reset the Boot Manager via Command Prompt.

What does it mean when it says no bootable device insert boot disk and press any key?

“No Bootable Device – Insert Boot Disk” is a Windows error that probably no one would want to see on their screen. The error simply means that your system has failed to locate the boot drive and can’t find the necessary boot files.

How do I fix disk error Press any key to restart?

Press Ctrl+Alt+Del to restart” on the screen like the picture below:

1. This message indicates that your hard drive has a problem when the operating system attempts to read the disk.
2. Changing this setting might be enough to help your computer boot normally.

How do I fix disk read error occurred Press Ctrl Alt Del to restart?

Fixed – “A disk read error occurred Press Ctrl + Alt + Del to restart”

1. ŸSolution 1: Test RAM memory.
2. ŸSolution 2: Check / replace hard drive cables.
3. ŸSolution 3: Reset or upgrade BIOS.
4. ŸSolution 4: Rebuild MBR (Master Boot Record)
5. ŸSolution 5: Verify and repair bad sectors.

How do I fix no bootable device?

To troubleshoot the error, you need to restart computer and press F2 or whatever key that computer prompts to enter BIOS, for example you may need to press “Del” or F10 key to enter BIOS setup. Then check the option labeled “Primary Hard Drive”. If it is “none”, then computer does not detect the connected hard drive.

How do I fix my computer a disk read error occurred?

If “A disk read error occurred” appears on a Windows 8, run the same bootrec utility:

1. Boot from the installation media.
2. Click Repair your computer or press R.
3. Click Troubleshoot.
4. Click Advanced options.
5. Click Command Prompt.
6. Type the commands and press Enter after each: bootrec /rebuildbcd bootrec /fixmbr bootrec /fixboot.

How do I fix disk read error in Windows 10?

Follow the steps below to fix the disk read error in Windows 10,

1. Step 1: Shutdown the System and let it cool down.
2. Step 2: Reset BIOS.
3. Step 3: Check the Hard Drive/SSD Cables.
4. Step 4: Inspect RAM.
5. Step 5: Use Windows Repair/Installation Media.
6. Step 6: Check the Drive Health Status and Recover Data.

How to fix “no bootable device — insert boot disk and press any key” error?

Problem: Unable to bootup laptop, show “No Bootable Device — Insert Boot Disk and Press Any Key” error. Step 1: Shut down computer. Step 2: Start computer and enter BIOS by pressing BIOS key ( F1, F2, Del, Esc and F10) while the system boots. Step 3: Locate Boot Mode option and change its value to UEFI.

What does it mean when your computer says no bootable drive?

This error means that computer can’t find boot drive which contains necessary files for computer to boot. If the error can’t be solved properly, it may not only stop you from booting up PC, but also cause data loss.

Why does my computer fail to find a device to boot?

You can encounter this issue when computer fails to find a device or file to boot system. Here are some possible causes that may lead to this error. It happens that users insert an unbootable disk or CD in computer and wrongly set it as boot device, or change boot order in BOIS improperly.

Why is my computer stuck on booting from internal hard drive?

If you stuck in such problem you can check your setting in BIOS first. Hard drive damage or bad sectors can be another reason for the error being explained. Hard drive carries the operating system and boot files. If you haven’t made any changes to boot sequence, the boot device is still the internal hard drive.

https://www.youtube.com/watch?v=4TZUnW-s7w8