How do you make a spiral sketch in Solidworks?
Table of Contents
How do you make a spiral sketch in Solidworks?
You can create a helix or spiral curve in a part.
- In a part, do one of the following: Open a sketch and sketch a circle. Select a sketch that contains a circle.
- Click Helix and Spiral (Curves toolbar) or Insert > Curve > Helix/Spiral .
- Set values in the Helix/Spiral PropertyManager.
- Click .
How do you make a helical spring in Solidworks?
how do i model a helical spring in solidworks
- Make one circle of mean diameter required.
- Go to Insert—> Curve —> Helix.
- Select the Circle.
- Adjust the parameters like Pitch, No of revolution and hit the green button for a helix.
- Now select a plane normal to helix path.
- Go to feature tab select Sweep.
How do you make a 2D spiral in SolidWorks?
On the menu, click Draw > Helix….Creating 2D Spirals
- Specify a point (P2) to define the base radius. This point defines the start point.
- Or follow these steps: Type a value to define the base radius. Set the start angle.
- Set the Diameter: Specify the base diameter. Specify the start point or type the start angle value.
How do you draw a spiral coil in SolidWorks?
How do you curve in SolidWorks?
on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. , select the curve in the graphics area or from the flyout FeatureManager design tree. , select the cylindrical face on the model where you want to project the sketch.
How do you make a spiral in SolidWorks?
You can create a helix or spiral curve in a part. Open a sketch and sketch a circle. Select a sketch that contains a circle. The diameter of the circle controls the starting diameter of the helix or spiral. Click Helix and Spiral (Curves toolbar) or Insert > Curve > Helix/Spiral .
How do I create a circle in SolidWorks?
Go to Tools > Sketch Entities > Circle or click on the Circle icon Create a sketch that starts at the Origin Change the diameter of the circle into Ø80 mm by clicking on the dimension button Click Right Mouse Button > Select to finish the circle Create a Helix / Spiral Go to Insert > Curve > Helix/Spiral or click on the Helix/Spiral icon
How to make a circle in SketchUp?
Go to Tools > Sketch Entities > Circle or click at the Circle icon. Create a circle somewhere at the Right Plane as shown in the picture. Connect the Circle sketch with the Spiral Sketch. Select the midpoint of the circle, hold down the Control key and select the Spiral sketch.
How do I create a spiral model in AutoCAD?
Open a new part with model units set to millimeters Select the Top Plane in the feature tree (menu at the left side) and create a sketch by clicking on the 2D Sketch icon The display changes so the Top plane faces you. Create a circle Go to Insert > Curve > Helix/Spiral or click on the Helix/Spiral icon