Can you get longer temples for glasses?

Temple extensions are applied to lengthen temples to virtually any desired length. Contacting manufactures to see if a longer temple size is available for the respective frame is always advised prior to extending temples. Some frames may be extended flawlessly, mainly temples with consistent width.

Can you buy glasses with longer arms?

Extended fit is exactly what it sounds like: glasses that have a larger fit. Our extended fit frames are specially designed with a wider frame front, larger lenses, and longer temple arms to fit more comfortably on larger faces.

Does temple length matter for glasses?

Temple Arm Length: While bridge width is the most important factor when reducing slippage, temple arm length can affect fit as well. If the temple arm length is too short, the glasses can be pulled higher onto your nose and put pressure on the backs of your ears, which often causes headaches.

What are the long parts of glasses called?

Temples – Long arms on the sides of the frame that extend from the hinge and over the ears to keep the glasses on your face. Temple length varies and plays a factor in the fit of a frame.

How do you measure temple length for glasses?

THE TEMPLE ARMS Measure from the hinge—where the arm connects in the front— to the spot where the arm begins to bend down around the ear. Then measure from the top of the bend to the bottom tip. Add the two sections together for the total temple arm length.

What is the longest temple length on glasses?

Temple length is measured in millimeters (mm) and most frames have temples that range in length from 120 to 150 mm. Eyeglasses with temples that are too long and aren’t fitted correctly (Fig 1) will slide down your nose.

What Is temple length glasses?

Temple length is the measurement in millimeters of the “arms” of the frame. This measurement does not vary as much as the others. 135mm, 140mm, 145mm, and 150mm are the most common options. The temple should fit horizontally and evenly along your face and fit comfortably along the outside of your ear.

What temple length do I need?

The temples of the frame should be long enough so they can be bent downward at about a 45-degree angle at a point just beyond the top of your ears. About 30 to 45 mm of the temple should extend beyond this bend point and be adjusted to conform closely to the contour of your head behind your ear.

What are temples on glasses?

The temples of your eyeglasses are the long stems of the frames that connect the front of the eyewear to the back of your head (just behind your ears). Eyeglass temples must be the correct length for your glasses to fit comfortably and securely on your face.

What is the part of the glasses that sits on your nose?

Nose pads
Nose pads: These parts of a glasses frame are the two little pieces on the inside of your glasses that sit on either side of your nose. Their purpose is to keep the glasses sitting nicely on the face and to avoid sliding down.

What is the average temple length?

Temple length can fall between 120mm and 150mm with 135mm, 140mm, 145mm and 150mm being the most common. If you have problems with temples being too short, check out other frames as different brands varied in temple length, get those with lengths of 145 and 150mm.

How do you measure temple size for glasses?

THE TEMPLE ARMS Measure from the hinge—where the arm connects in the front— to the spot where the arm begins to bend down around the ear. Then measure from the top of the bend to the bottom tip.

What is the size of the temple on a pair of glasses?

The size of this piece ranges from 14mm to 24mm. This is the length of the temple from each screw to its temple tip, including the bend that sits on your ear. The temple is typically 120mm to 150mm long. This is the vertical height of your eyeglass lenses at the widest point of the lens within the frame.

What is the frame size of eyeglasses and sunglasses?

The frame size of eyeglasses and sunglasses uses the same three key measurements: 1 Eye Size: the width of the frame around the lens 2 Bridge Width: the width of the frame across your nose 3 Temple Length: the length of the arm of the glasses from the front of the frame to behind your ear More

How do I know what size my glasses are?

Most of the time the frame measurements are engraved on the inside of your eyeglass temples (arm pieces) or behind the nose bridge area. For instance, these will be shown as: Lens width is the horizontal width of the frame’s lens in millimeters. Usually, the eye size ranges from 40 mm to 60 mm

What is the normal size of a lens?

Lens Width Lens width is the horizontal width of the frame’s lens in millimeters. Usually, the eye size ranges from 40 mm to 60 mm In case you already have an eyeglass frame, you can refer to its frame size.