How low can you set your thermostat before pipes freeze?

Generally thermostats can’t be set any lower than 45 degrees. A properly built house that took freezing temperatures into account should be fine there. If the house was not built properly to take into account the pipes then 80 degrees may not be warm enough to prevent the pipes from freezing.

How low can I keep my thermostat in the winter?

How Low is Too Low to Set My Thermostat? If you’re going to be leaving your home or traveling for the winter, it’s best to keep your thermostat set no lower than 55 degrees. If you don’t, you could risk having your pipes freeze over.

Will pipes freeze at 62 degrees?

Anywhere from 55-62 degrees will keep your pipes from freezing while cutting your heating bill dramatically.

Will pipes freeze at 65 degrees?

Keep the house heated to a minimum of 65 degrees. The temperature inside the walls – where the pipes are located – is substantially colder than the walls themselves. A temperature lower than 65 degrees will not keep the inside walls from freezing. Keeping water moving within pipes will prevent freezing.

Will pipes freeze at 55 degrees?

The absolute minimum temperature to keep pipes from freezing is 55° F. However, between 60° F and to 68° F is a much safer range. This ensures that the air around your pipes is warm enough to prevent freezing.

What is the lowest temperature to set thermostat?

According to the Department of Energy, setting your thermostat to the lowest comfortable temperature, which is typically 68 degrees Fahrenheit in the winter, helps slow down heat loss for homes with a regular furnace or baseboard heating system.

What is the lowest temperature to keep house?

The World Health Organization (WHO) recommends setting your thermostat no lower than 64 degrees (F) in the Winter months while people are in the home. If there are infants or elderly individuals, they recommend keeping the temperature at 70 degrees at a minimum.

What indoor temperature is too cold for pipes?

The absolute minimum temperature to keep pipes from freezing is 55° F. However, between 60° F and to 68° F is a much safer range.

Should you run hot or cold water to keep pipes from freezing?

When the weather is very cold outside, let the cold water drip from the faucet served by exposed pipes. Running water through the pipe – even at a trickle – helps prevent pipes from freezing.

What temperature should I Set my thermostat to keep pipes from freezing?

Also, if you live in a humid climate, setting the thermostat at a higher temperature to avoid getting musty as the furnace heats the air and lowers the relative humidity. Also, If you live in expose area then set it on the high side around 55 ℉ or higher to keep pipes from freezing.

Can I leave the thermostat at 50 degrees?

You should have no issues by leaving the thermostat at 50 °F. If you have pipes in exterior walls you want to set the thermostat higher, such as 55 ℉ or 60 ℉, to warm the house enough that the pipes in the wall are above freezing.

What happens if your pipes freeze?

Frozen pipes can burst and flood your home, potentially causing severe water damage according to the Insurance Institute for Business and Home Safety. That’s why you don’t want to set your temperature setting too low or turn off your heat completely.

What is the best temperature to set the thermostat?

Each house is different and the optimal thermostat setting depends on the level of insulation in the house, pipe layout, exterior temperature, and location. You should set the temperature around 50 to 60 degrees Fahrenheit (℉). Most of the time, dropping the thermostat to 50 °F to save some heating bill is fine.