Why does my Galaxy S9 keep saying moisture detected?

Step 1 Galaxy S9 Plus Moisture Detected Fix If there is water or too much moisture present in the connector, it will trigger a warning/audio beep – and disable charging. The water present check is performed when charger is inserted. clean and dry it before charging. This can save the connector/phone.

How do I permanently disable moisture detected S9?

8 Answers

1. Buy a wireless charger and get enough charge on it to atleast be able to get into settings (2-3\% would be enough)
2. GO into settings and into battery usage.
3. Scroll down to ‘Recent Battery Usage’ and find the app ‘Android System’
4. Tap on that and then tap on ‘Force Stop’.

Why does my Samsung Galaxy keep saying moisture detected?

Samsung has built this moisture-detecting feature into its phones for several years in a bid to protect your handset from corrosive damage caused by plugging your charger into the damp charging port. The alarm is triggered by attempting to plug in the charger, so it’s best to avoid doing so until the port has dried.

How do you dry a charging USB port?

Here’s how to dry out your phone charging port:

1. Don’t grab the rice.
2. Leave your device in a dry area for at least an hour with the charging port facing down.
3. If you suspect your USB-C or Lightning cable is also wet, store it in a dry place where air can reach it for an hour as well.

Why won’t the moisture detected won’t go away?

It is possible that the update contained a bug which caused the moisture sensors to glitch out and stopped them from working efficiently. Wet Port: If the charging port of the mobile phone is wet or has retained some moisture the “moisture detected” message will not go away unless you get rid of it.

How long does moisture stay in USB port?

Water will naturally evaporate from the charging port within approximately 1 to 2 hours. If any liquid other than fresh water enters the charging port of your device, you must rinse it in fresh water and dry it thoroughly with a dry, soft cloth.

How do I get moisture out of my USB port?

Placing your phone in water can help remove any moisture. It is best to do this overnight, as it can take some time, but it certainly is a tried and true method. However, a wet USB port often isn’t a severe issue and can often be resolved by leaving your phone out to dry or placing it in front of a fan.

How do I clear my Samsung moisture detected?

Press and hold the “power” button and tap on the “Switch off” option. When the device is completely turned off, press and hold the “Volume Down” and the “Bixby” key. Then in the same instance also press and hold the “Power” button. When the green Android logo is shown, release all the keys.

How to charge your Galaxy S9 with moisture detected error?

How to charge your Galaxy S9 even with moisture detected error Turn your phone off and then connect it to its charger. Remember that for the error show up, the phone should be powered… Use a wireless charger. The notification shows if the phone detects moisture in the charger port. When

Why is my Samsung Galaxy charging port wet?

Cause 1: Traces of Liquid or Water in the Charging Port Sometimes, due to the temperature variations in the environment, your Samsung Galaxy may have some moisture deposited in the charging port. It may even be possible that your phone may have been accidentally subjected to moisture in the form of water or any other liquid substance.

How to fix moisture in water-resistant Samsung phone or tablet’s charging port?

Moisture in water-resistant Samsung phone or tablet’s charging port. 1 Remove the moisture. If you try to connect your phone or tablet to the charger while the charging port is wet, you will hear an alarm go off with 2 Wait for moisture to evaporate. 3 Use a wireless charger. 4 Request service.

Why does my phone say ‘moisture detected’?

[Troubleshooting Guide] As the owner, you should know if there’s a reason for your phone to pop the ‘moisture detected’ error up. For instance, if you took a phone underwater or if the phone got splashed with water and then this issue started, then it’s more likely that there’s moisture in the port.