Can I double shock my pool?

In this case, you should double shock your swimming pool water. To double shock, you will need to add 2 pounds for every 10,000 gallons of water. For instance, if you pool is 20,000 gallons, you will add 4 pounds of shock.

How do you fix an over shocked pool?

Add one-half ounce of sodium thiosulfate granules per 1,000 gallons of swimming pool water directly into the center of the pool. Allow swimming pool water to circulate with the sodium thiosulfate granules in the water for about 30 minutes. Turn off pool filtration pumps and unplug from the electrical source.

Can too much shock damage pool liner?

Using too much shock may result in a brief down period of your pool. A pool that’s been recently shocked can cause skin irritation, bleached clothes, and a bleached pool liner. To avoid vinyl damage, you can mix shock with water in a bucket and make sure it’s completely dissolved before adding it to your pool.

Can you shock a pool twice in one week?

Shock at night to give your pool shock the time it needs to do its job. Also, shock your pool once a week, using about 1 lb. (. 5 kg) of shock for every 10,000 gallons (37,854 L) of water, and test until you’re at or near the target of 3 ppm.

Can I shock my pool 2 days in a row?

It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

Why did my pool get cloudy after I shocked it?

But if the cloudy water persists long after you’ve shocked the pool, you’re likely having an issue with water balance, circulation, or filtration. Heavy use of a calcium based pool shock (cal-hypo) may increase Calcium Hardness over a period of time, increasing your odds of cloudy water.

Can you shock pool twice in one day?

SKIMMER NOTES: It’s unlikely but it could happen. It would take a lot of shock to really make the water unsafe for swimming. The best way to make sure you’re safe to swim is to test your pool water and make sure free chlorine levels are between 1-4ppm for healthy swimming.

Why did my pool turn green after I shocked it?

When shock chlorine oxidizes the copper, it turns green and that’s what you’re seeing in the pool. To get rid of it you’ll need to raise the pool’s calcium hardness by adding calcium chloride. The other culprit can be high levels of pollen.

What happens if you put too much shock?

You cannot overshock a swimming pool or add too much. Adding too much shock or overshocking your pool will kill off algae. The negative of adding too much shock is it will upset the chemical balance of your pool.

Can you shock a pool two days in a row?

How long after shocking pool will it clear up?

Keep your pump and filter running. Give the shock a good 12 to 24 hours to work it’s magic. If the algae hasn’t cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.

How many times in a week can I shock my pool?

about once a week
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.

How long after shocking a pool can you swim?

When doing a pool shock (superchlorinating the pool with concentrated chlorine), you should wait between eight and 36 hours before swimming in your pool.

Can you over shock a pool?

You cannot over-shock a swimming pool. Adding more chlorine will speed up the cleaning process. Always keep your filter running during the shock treatment and wait until chlorine levels return to

When to shock my Pool?

How Often to Shock Your Pool. You don’t want to wait for a bad smell or itchy eyes to happen before you shock your pool. We recommend a pool shock once a week, or at least once every other week to properly maintain your water chemistry. The more you use the pool, the more often you should reach for the pool shock.

How much chlorine to shock at pool opening?

For pool startup, it’s best to double shock your pool, meaning that you add two pounds of chlorine shock for every 10,000 gallons of water. After shocking a pool, aim to have chlorine at 10 ppm . After this routine, your pool should be good to go.