What is the advantage of Bunsen burner?
Table of Contents
What is the advantage of Bunsen burner?
The Bunsen burner is a convenient way to apply heat in a variety of situations. The flame can be adjusted to a luminous yellow when not being used which makes them safer as it gives added visibility. This flame is not suitable for heating things though as it deposits too much soot.
What are the things to do while using a Bunsen burner?
Safety advice when using a Bunsen burner
- Always light the splint before turning on the gas.
- Always inspect the Bunsen burner, tubing, and gas valve before use.
- Tie back long hair and do not wear loose long sleeves.
- Use tongs when holding objects in a flame.
- Never leave a lit Bunsen burner unattended.
When you are finished using a Bunsen burner you should?
When you are finished using a bunsen burner you should:
- Leave it on for the next person to use. It’s the only considerate choice.
- Cover the burner with an inverted beaker to suffocate the flame.
- Pull off the hose connecting the burner to the gas. The burner won’t have gas, so it won’t be on fire.
- Turn off the gas. Duh!
What is backfiring in the use of Bunsen burner?
(of a gun, cannon, Bunsen burner, etc.) To fire in the opposite direction, for example due to an obstruction in the barrel. (of an engine) To experience a premature ignition of fuel or an ignition of exhaust gases, making a popping sound.
What are the safety precautions in using the Bunsen burner?
Procedure Place the Bunsen burner away from any overhead shelving, equipment or light fixtures by at least 12 inches. Remove all papers, notebooks, combustible materials and excess chemicals from the area. Tie-back any long hair, dangling jewelry, or loose clothing.
What are the hazards of a bunsen burner?
Dangers of a bunsen burner: Strikebacks – A strikeback occurs when the flame is given too much oxygen such that instead of the fire burning at the top of the chimney, it flashes back and burns at the jet, where the methane just enters at the bottom of the chimney.
What are the Bunsen burner safety rules?
Always wear safety goggles and a lab apron when using this burner.
What are the advantages of using a bunsen burner?
A bunsen burner with a bypass tube attachment contains a control stopcock and pilot ignition flame. With addition of the by-pass feature a great economy in the use of gas may be obtained. The user has the ability of turning down the gas when it is not required, therefore relighting when only necessary. There is small jet inside the burner.